update

devices/Epilog_32_ZING.xml

@@ -1,8 +1,7 @@
 <laserDevice>
-  <jobSentText>Job wurde unter dem Namen '$jobname' gesendet.
-Lüftung anschalten nicht vergessen!
-Material prüfen: PVC, Vinyl, ABS, Polycarbonat, HDPE, Polystyrol - NICHT LASERN!</jobSentText>
-  <jobPrefix>FabLab-Rothenburg </jobPrefix>
+  <jobSentText>Job wurde unter dem Namen &apos;$jobname&apos; gesendet.
+Lüftung anschalten nicht vergessen!</jobSentText>
+  <jobPrefix>zoadian </jobPrefix>
   <laserCutter class="com.t_oster.liblasercut.drivers.EpilogZing">
     <hostname>192.168.111.4</hostname>
     <port>515</port>
@@ -75,5 +74,5 @@ Material prüfen: PVC, Vinyl, ABS, Polycarbonat, HDPE, Polystyrol - NICHT LASERN
   <projectorWidth>0</projectorWidth>
   <projectorHeight>0</projectorHeight>
   <thumbnailPath>Epilog_32_ZING.png</thumbnailPath>
-  <name>Epilog ZING (FabLab Rothenburg)</name>
-</laserDevice>
+  <name>Epilog ZING</name>
+</laserDevice>

devices/Epilog_32_ZING_32__40_FabLab_32_Rothenburg_41_.xml

@@ -0,0 +1,79 @@
+<laserDevice>
+  <jobSentText>Job wurde unter dem Namen '$jobname' gesendet.
+Lüftung anschalten nicht vergessen!
+Material prüfen: PVC, Vinyl, ABS, Polycarbonat, HDPE, Polystyrol - NICHT LASERN!</jobSentText>
+  <jobPrefix>FabLab-Rothenburg </jobPrefix>
+  <laserCutter class="com.t_oster.liblasercut.drivers.EpilogZing">
+    <hostname>192.168.111.4</hostname>
+    <port>515</port>
+    <autofocus>false</autofocus>
+    <bedWidth>400.0</bedWidth>
+    <bedHeight>300.0</bedHeight>
+  </laserCutter>
+  <cameraHomography>
+    <referencePoints>
+      <java.awt.geom.Point2D_-Double>
+        <x>80.0</x>
+        <y>60.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>320.0</x>
+        <y>240.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>320.0</x>
+        <y>60.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>80.0</x>
+        <y>240.0</y>
+      </java.awt.geom.Point2D_-Double>
+    </referencePoints>
+    <viewPoints>
+      <java.awt.geom.Point2D_-Double>
+        <x>975.0</x>
+        <y>702.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>436.0</x>
+        <y>300.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>413.0</x>
+        <y>695.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>957.0</x>
+        <y>305.0</y>
+      </java.awt.geom.Point2D_-Double>
+    </viewPoints>
+    <homography>
+      <A>
+        <double-array>
+          <double>-0.0016547253967021424</double>
+          <double>2.263416928489545E-4</double>
+          <double>0.8098399902570946</double>
+        </double-array>
+        <double-array>
+          <double>-1.232922075045405E-5</double>
+          <double>-0.0014684882589506099</double>
+          <double>0.5866462045159145</double>
+        </double-array>
+        <double-array>
+          <double>1.2004301784653683E-8</double>
+          <double>3.105724581673513E-7</double>
+          <double>6.891668059228682E-4</double>
+        </double-array>
+      </A>
+      <m>3</m>
+      <n>3</n>
+    </homography>
+  </cameraHomography>
+  <cameraURL>http://192.168.111.226:8080/?action=snapshot</cameraURL>
+  <cameraTiming>500</cameraTiming>
+  <projectorTiming>0</projectorTiming>
+  <projectorWidth>0</projectorWidth>
+  <projectorHeight>0</projectorHeight>
+  <thumbnailPath>Epilog_32_ZING.png</thumbnailPath>
+  <name>Epilog ZING (FabLab Rothenburg)</name>
+</laserDevice>

laserprofiles/Epilog_32_ZING/Acorn_Sperrholz/11.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>99</power>
+    <speed>39</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Airplak_Kartonschaum/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Graue_32_Pappe/0.55mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>25</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Graue_Pappe/0.55mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Judopokal_Platte/0.6mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>60</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_3mm/3.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_3mm/3.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_4mm/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_4mm/4.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_4mm/4.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/5.0mm/cut.xml → laserprofiles/Epilog_32_ZING/MDF_5mm/5.0mm/cut.xml

@@ -1,8 +1,8 @@
 <linked-list>
   <PowerSpeedFocusFrequencyProperty>
-    <power>60</power>
+    <power>100</power>
     <speed>20</speed>
     <focus>0.0</focus>
-    <frequency>30</frequency>
+    <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_5mm/5.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_5mm/5.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_6mm/6.0mm/cut.xml

@@ -0,0 +1,14 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>15</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>15</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_6mm/6.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_6mm/6.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Moosgummi/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>8</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Papier/0.0mm/engrave.xml

@@ -0,0 +1,12 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>25</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+  <PowerSpeedFocusProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Platane/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>25</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/10.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_32_Pappel/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_32_Pappel/4.0mm/engrave_32_3d.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>80</power>
+    <speed>60</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

materials/Eloxiertes_Blech.xml → materials/Eloxiertes_32_Blech.xml

@@ -1,7 +1,7 @@
 <material>
   <engraveColor>#352ce7</engraveColor>
   <cutColor>#db1717</cutColor>
-  <color>#C0C0C0</color>
+  <color>#ffffff</color>
   <name>Eloxiertes Blech</name>
   <materialThicknesses>
     <float>1.0</float>

materials/Graue_Pappe.xml → materials/Graue_32_Pappe.xml

@@ -1,7 +1,7 @@
 <material>
   <engraveColor>#000cff</engraveColor>
   <cutColor>#ff0000</cutColor>
-  <color>#808080</color>
+  <color>#fefefe</color>
   <name>Graue Pappe</name>
   <materialThicknesses>
     <float>0.55</float>

materials/Judopokal-Platte.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#f80b0b</engraveColor>
+  <cutColor>#161ffa</cutColor>
+  <color>#ffda00</color>
+  <name>Judopokal-Platte</name>
+  <materialThicknesses>
+    <float>0.6</float>
+  </materialThicknesses>
+</material>

materials/MDF_3mm.xml → materials/MDF_2mm.xml

@@ -2,8 +2,8 @@
   <engraveColor>#000cff</engraveColor>
   <cutColor>#ff0000</cutColor>
   <color>#D3D3D3</color>
-  <name>MDF</name>
+  <name>MDF 2mm</name>
   <materialThicknesses>
-    <float>3.0</float>
+    <float>2.0</float>
   </materialThicknesses>
 </material>

materials/MDF_4mm.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#000cff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#D3D3D3</color>
+  <name>MDF 4mm</name>
+  <materialThicknesses>
+    <float>4.0</float>
+  </materialThicknesses>
+</material>

materials/MDF_5mm.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#000cff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#D3D3D3</color>
+  <name>MDF 5mm</name>
+  <materialThicknesses>
+    <float>5.0</float>
+  </materialThicknesses>
+</material>

materials/MDF_6mm.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#000cff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#D3D3D3</color>
+  <name>MDF 6mm</name>
+  <materialThicknesses>
+    <float>6.0</float>
+  </materialThicknesses>
+</material>

materials/PET.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#0111d1</engraveColor>
+  <cutColor>#f1150a</cutColor>
+  <color>#ffffff</color>
+  <name>PET</name>
+  <materialThicknesses>
+    <float>0.55</float>
+  </materialThicknesses>
+</material>

materials/Plexiglas.xml

@@ -0,0 +1,10 @@
+<material>
+  <engraveColor>#0100ff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#ffffff</color>
+  <name>Plexiglas</name>
+  <materialThicknesses>
+    <float>4.0</float>
+    <float>3.0</float>
+  </materialThicknesses>
+</material>

materials/Sperrholz_Pappel.xml → materials/Sperrholz_32_Pappel.xml

@@ -1,10 +1,10 @@
 <material>
   <engraveColor>#000cff</engraveColor>
   <cutColor>#ff0000</cutColor>
-  <color>#8B7355</color>
+  <color>#fefefe</color>
   <name>Sperrholz Pappel</name>
   <materialThicknesses>
-    <float>3.0</float>
     <float>4.0</float>
+    <float>3.0</float>
   </materialThicknesses>
-</material>
+</material>

profiles/cut.xml

@@ -1,6 +1,6 @@
 <vectorProfile>
   <DPI>500.0</DPI>
-  <description>Cut through the material (Red: #FF0000)</description>
+  <description>Cut through the material</description>
   <name>cut</name>
   <orderStrategy>INNER_FIRST</orderStrategy>
   <useOutline>false</useOutline>

profiles/engrave.xml

@@ -1,6 +1,6 @@
 <rasterProfile>
   <DPI>500.0</DPI>
-  <description>Engrave raster (Black: #000000)</description>
+  <description>Engrave</description>
   <name>engrave</name>
   <invertColors>false</invertColors>
   <colorShift>0</colorShift>

profiles/engrave_32_3d.xml

@@ -1,6 +1,6 @@
 <raster3dProfile>
   <DPI>500.0</DPI>
-  <description>3D Engrave - modulate laser power by grayscale (Black: #000000)</description>
+  <description>Engrave while modulating laserpower according to image darkness</description>
   <name>engrave 3d</name>
   <invertColors>false</invertColors>
   <colorShift>0</colorShift>

profiles/mark.xml

@@ -1,6 +1,6 @@
 <vectorProfile>
   <DPI>500.0</DPI>
-  <description>Mark/Score lines (Green: #00FF00)</description>
+  <description>Engrave along lines</description>
   <name>mark</name>
   <orderStrategy>NEAREST</orderStrategy>
   <useOutline>false</useOutline>

settings/settings.xml

@@ -8,9 +8,15 @@
     <height>1054</height>
   </windowBounds>
   <useThicknessAsFocusOffset>true</useThicknessAsFocusOffset>
-  <recentFiles/>
-  <lastMaterial>Sperrholz Pappel</lastMaterial>
-  <lastLaserDevice>Epilog ZING (FabLab Rothenburg)</lastLaserDevice>
+  <recentFiles>
+    <string>/tmp/ink_ext_XXXXXX.svgNMWZCX.svg</string>
+    <string>/tmp/ink_ext_XXXXXX.svgJR56CX.svg</string>
+    <string>/tmp/ink_ext_XXXXXX.svgIIVTCX.svg</string>
+    <string>/tmp/ink_ext_XXXXXX.svgXJVXCX.svg</string>
+    <string>/tmp/ink_ext_XXXXXX.svgWSLSCX.svg</string>
+  </recentFiles>
+  <lastMaterial>Plexiglas</lastMaterial>
+  <lastLaserDevice>Epilog ZING</lastLaserDevice>
   <availableImporters/>
-  <editSettingsBeforeExecuting>true</editSettingsBeforeExecuting>
-</visicutPreferences>
+  <editSettingsBeforeExecuting>false</editSettingsBeforeExecuting>
+</visicutPreferences>