inittial

devices/Atomstack_32_A20_32_PRO.xml

@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<laserDevice version="0">
+  <originBottomLeft>true</originBottomLeft>
+  <jobSentText>Job was sent as '$jobname'
+Please:
+-Close the lid
+-Turn on the Ventilation
+-And press 'start' on the Lasercutter $name</jobSentText>
+  <jobPrefix>visicut </jobPrefix>
+  <laserCutter class="de.thomas_oster.liblasercut.drivers.GenericGcodeDriver">
+    <lineend>CRLF</lineend>
+    <baudRate>115200</baudRate>
+    <flipXaxis>false</flipXaxis>
+    <flipYaxis>true</flipYaxis>
+    <httpUploadUrl>http://192.168.111.111/upload</httpUploadUrl>
+    <autoPlay>false</autoPlay>
+    <postHttpUploadGcode></postHttpUploadGcode>
+    <supportedResolutions>100,500,1000</supportedResolutions>
+    <waitForOKafterEachLine>false</waitForOKafterEachLine>
+    <preJobGcode>G21,G90,M3</preJobGcode>
+    <postJobGcode>M5,G0 X0 Y0</postJobGcode>
+    <serialTimeout>15000</serialTimeout>
+    <exportPath>/tmp/</exportPath>
+    <uploadMethod>HTTP</uploadMethod>
+    <identificationLine>Grbl</identificationLine>
+    <initDelay>5</initDelay>
+    <host>10.10.10.222</host>
+    <comport>auto</comport>
+    <max__speed>2400.0</max__speed>
+    <travel__speed>3600.0</travel__speed>
+    <blankLaserDuringRapids>false</blankLaserDuringRapids>
+    <useBidirectionalRastering>false</useBidirectionalRastering>
+    <spindleMax>1000.0</spindleMax>
+    <currentPower>-1.0</currentPower>
+    <currentSpeed>-1.0</currentSpeed>
+    <nextPower>-1.0</nextPower>
+    <nextSpeed>-1.0</nextSpeed>
+    <currentFocus>0.0</currentFocus>
+    <bedWidth>400.0</bedWidth>
+    <bedHeight>400.0</bedHeight>
+    <rasterPadding>5.0</rasterPadding>
+    <rasterPaddingAllowOutsideMachineSpace>false</rasterPaddingAllowOutsideMachineSpace>
+    <gCodeDigits>6</gCodeDigits>
+    <sCodeDigits>3</sCodeDigits>
+  </laserCutter>
+  <cameraTiming>0</cameraTiming>
+  <projectorTiming>0</projectorTiming>
+  <projectorWidth>0</projectorWidth>
+  <projectorHeight>0</projectorHeight>
+  <name>Atomstack A20 PRO</name>
+</laserDevice>

devices/Epilog_32_ZING.xml

@@ -0,0 +1,79 @@
+<laserDevice>
+  <jobSentText>Job wurde unter dem Namen '$jobname' gesendet.
+Lüftung anschalten nicht vergessen!
+Material prüfen: PVC, Vinyl, ABS, Polycarbonat, HDPE, Polystyrol - NICHT LASERN!</jobSentText>
+  <jobPrefix>FabLab-Rothenburg </jobPrefix>
+  <laserCutter class="com.t_oster.liblasercut.drivers.EpilogZing">
+    <hostname>192.168.111.4</hostname>
+    <port>515</port>
+    <autofocus>false</autofocus>
+    <bedWidth>400.0</bedWidth>
+    <bedHeight>300.0</bedHeight>
+  </laserCutter>
+  <cameraHomography>
+    <referencePoints>
+      <java.awt.geom.Point2D_-Double>
+        <x>80.0</x>
+        <y>60.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>320.0</x>
+        <y>240.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>320.0</x>
+        <y>60.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>80.0</x>
+        <y>240.0</y>
+      </java.awt.geom.Point2D_-Double>
+    </referencePoints>
+    <viewPoints>
+      <java.awt.geom.Point2D_-Double>
+        <x>975.0</x>
+        <y>702.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>436.0</x>
+        <y>300.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>413.0</x>
+        <y>695.0</y>
+      </java.awt.geom.Point2D_-Double>
+      <java.awt.geom.Point2D_-Double>
+        <x>957.0</x>
+        <y>305.0</y>
+      </java.awt.geom.Point2D_-Double>
+    </viewPoints>
+    <homography>
+      <A>
+        <double-array>
+          <double>-0.0016547253967021424</double>
+          <double>2.263416928489545E-4</double>
+          <double>0.8098399902570946</double>
+        </double-array>
+        <double-array>
+          <double>-1.232922075045405E-5</double>
+          <double>-0.0014684882589506099</double>
+          <double>0.5866462045159145</double>
+        </double-array>
+        <double-array>
+          <double>1.2004301784653683E-8</double>
+          <double>3.105724581673513E-7</double>
+          <double>6.891668059228682E-4</double>
+        </double-array>
+      </A>
+      <m>3</m>
+      <n>3</n>
+    </homography>
+  </cameraHomography>
+  <cameraURL>http://192.168.111.226:8080/?action=snapshot</cameraURL>
+  <cameraTiming>500</cameraTiming>
+  <projectorTiming>0</projectorTiming>
+  <projectorWidth>0</projectorWidth>
+  <projectorHeight>0</projectorHeight>
+  <thumbnailPath>Epilog_32_ZING.png</thumbnailPath>
+  <name>Epilog ZING (FabLab Rothenburg)</name>
+</laserDevice>

devices/RedSail_32_X700.xml

@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<laserDevice version="0">
+  <originBottomLeft>false</originBottomLeft>
+  <jobSentText>Job was sent as '$jobname'
+Please:
+-Close the lid
+-Turn on the Ventilation
+-And press 'start' on the Lasercutter $name</jobSentText>
+  <jobPrefix>visicut </jobPrefix>
+  <laserCutter class="de.thomas_oster.liblasercut.drivers.Ruida">
+    <baudRate>921600</baudRate>
+    <host>192.168.111.5</host>
+    <comport>auto</comport>
+    <useBidirectionalRastering>false</useBidirectionalRastering>
+    <BedWidth>700.0</BedWidth>
+    <BedHeight>500.0</BedHeight>
+    <LaserPowerMin>0</LaserPowerMin>
+    <LaserPowerMax>70</LaserPowerMax>
+    <MaxVectorCutSpeed>1000</MaxVectorCutSpeed>
+    <MaxVectorMoveSpeed>1000</MaxVectorMoveSpeed>
+    <serialTimeout>15000</serialTimeout>
+    <exportPath></exportPath>
+    <uploadMethod>IP</uploadMethod>
+  </laserCutter>
+  <cameraTiming>0</cameraTiming>
+  <projectorTiming>0</projectorTiming>
+  <projectorWidth>0</projectorWidth>
+  <projectorHeight>0</projectorHeight>
+  <name>RedSail X700</name>
+</laserDevice>

laserprofiles/Epilog_32_ZING/Acorn_Sperrholz/11.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>80</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/2.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/2.5mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>75</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/3.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>55</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/3.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>25</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>25</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Airplak_Kartonschaum/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Bastelpapier/0.1mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>12</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Baumwollstoff/0.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>28</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Buettenpapier_300g/0.3mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>50</power>
+    <speed>80</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Depron_Schaum/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Depron_Schaum/6.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>45</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Eloxiertes_Blech/1.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Filz_Polyester/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/1.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>30</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/2.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>30</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Glas/3.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Graue_Pappe/0.55mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/HDF/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>15</speed>
+    <focus>-1.5</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Hartfaserplatte/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>80</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Hartfaserplatte/5.0mm/cut.xml

@@ -0,0 +1,14 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>50</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>50</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Judopokal_Platte/0.6mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>50</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Karton_160g/0.2mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>400</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Karton_200g/0.25mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>400</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Karton_300g/0.3mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>400</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kiefer_Massivholz/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kiefer_Massivholz/8.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>15</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/0.8mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>27</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/1.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>22</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/1.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>20</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/1.5mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>80</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kromapappe/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Leder/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>85</power>
+    <speed>75</speed>
+    <focus>0.0</focus>
+    <frequency>2500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/3.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/3.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>20</speed>
+    <focus>0.0</focus>
+    <frequency>30</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/5.0mm/engrave_32_3d.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>80</power>
+    <speed>60</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Moosgummi/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>30</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/PET_Folie/0.55mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>200</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/PET_Folie_0.5mm/0.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>28</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/POM_Delrin/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>12</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/POM_Delrin/6.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>8</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/PP_Folie/0.8mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>80</speed>
+    <focus>0.0</focus>
+    <frequency>50</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Platane/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>22</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/10.0mm/cut.xml

@@ -0,0 +1,14 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>7</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>7</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>25</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>20</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/6.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>15</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/1.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>80</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/10.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>10</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>34</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Schichtstoff_HPL/0.8mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Siebdruckkarton/1.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>45</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>1000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Silikon_Gummimatte/1.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>30</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/SnapPap/1.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>50</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>35</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/3.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>60</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/3.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>20</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>15</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/6.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>12</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/8.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>10</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Buche/1.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Buche/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>10</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Buche/6.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>8</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Gabun/2.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Linde/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>40</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Linde/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>30</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Linde/5.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>20</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Linde/6.5mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>16</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Linde/8.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>12</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Pappel/3.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Pappel/3.0mm/engrave.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Pappel/4.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>70</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Pappel/4.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>10</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Stempelgummi/2.3mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>25</speed>
+    <focus>1.5</focus>
+    <frequency>2500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Tesa_6930_Laserfolie/0.1mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Wellpappe/2.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>100</power>
+    <speed>8</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Wellpappe/6.0mm/cut.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>90</power>
+    <speed>48</speed>
+    <focus>0.0</focus>
+    <frequency>500</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

materials/Acorn_Sperrholz.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#0100ff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#DEB887</color>
+  <name>Acorn Sperrholz</name>
+  <materialThicknesses>
+    <float>11.0</float>
+  </materialThicknesses>
+</material>

materials/Acrylglas.xml

@@ -0,0 +1,11 @@
+<material>
+  <engraveColor>#0100ff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#FFFFFF</color>
+  <name>Acrylglas (PMMA)</name>
+  <materialThicknesses>
+    <float>2.5</float>
+    <float>3.0</float>
+    <float>4.0</float>
+  </materialThicknesses>
+</material>

materials/Airplak_Kartonschaum.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#000cff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#FFFFFF</color>
+  <name>Airplak Kartonschaum</name>
+  <materialThicknesses>
+    <float>3.0</float>
+  </materialThicknesses>
+</material>

materials/Bastelpapier.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#404040</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#FFFFFF</color>
+  <name>Dickes Bastelpapier</name>
+  <materialThicknesses>
+    <float>0.1</float>
+  </materialThicknesses>
+</material>

materials/Baumwollstoff.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#404040</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#FFFFFF</color>
+  <name>Baumwollstoff</name>
+  <materialThicknesses>
+    <float>0.5</float>
+  </materialThicknesses>
+</material>

materials/Buettenpapier_300g.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#404040</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#FFFFFF</color>
+  <name>Büttenpapier 300g</name>
+  <materialThicknesses>
+    <float>0.3</float>
+  </materialThicknesses>
+</material>

materials/Depron_Schaum.xml

@@ -0,0 +1,10 @@
+<material>
+  <engraveColor>#000cff</engraveColor>
+  <cutColor>#ff0000</cutColor>
+  <color>#FFFFFF</color>
+  <name>Depron Schaum (EPP)</name>
+  <materialThicknesses>
+    <float>3.0</float>
+    <float>6.0</float>
+  </materialThicknesses>
+</material>

materials/Eloxiertes_Blech.xml

@@ -0,0 +1,9 @@
+<material>
+  <engraveColor>#352ce7</engraveColor>
+  <cutColor>#db1717</cutColor>
+  <color>#C0C0C0</color>
+  <name>Eloxiertes Blech</name>
+  <materialThicknesses>
+    <float>1.0</float>
+  </materialThicknesses>
+</material>