Fix material path encoding, add thumbnails, tools and README

VisiCut builds the laserprofiles/ paths from the material and profile
*names* via Helper.toPathName(), not from the file names, so folders like
Sperrholz_Birke/ were silently never found. Rename every affected material
and laserprofile folder to the encoded form (Sperrholz_32_Birke/ etc.) and
merge the duplicates that had accumulated under the old and new spellings.

- materials: add a thumbnail PNG per material and reference it from the XML
- tools/validate.py: check names, paths and profile values against VisiCut's
  own conventions
- tools/make_thumbnails.py: build the material thumbnails
- README: document the naming rule and the folder layout
- settings: drop stale recentFiles, point lastMaterial at a material that
  still exists

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>

README.md

@@ -0,0 +1,108 @@
+# VisiCut settings — FabLab Rothenburg
+
+Inhalt des VisiCut-Einstellungsordners (`~/.visicut`): Geräte, Materialien, Profile und die
+getesteten Laserparameter je Material und Dicke.
+
+Installation: Inhalt nach `~/.visicut` kopieren (oder das Repo dorthin klonen) und VisiCut starten.
+
+## Ordner
+
+| Ordner | Inhalt |
+|---|---|
+| `devices/` | Lasercutter (`LaserDevice`), inkl. Kamera-Homographie |
+| `materials/` | Materialien (`MaterialProfile`) + Vorschaubild `<name>.png` |
+| `profiles/` | Bearbeitungsarten: `cut`, `mark`, `engrave`, `engrave 3d` |
+| `laserprofiles/<Gerät>/<Material>/<Dicke>mm/<Profil>.xml` | Leistung / Geschwindigkeit / Fokus / Frequenz |
+| `settings/` | VisiCut-Voreinstellungen |
+| `tools/` | Prüf- und Hilfsskripte (nicht von VisiCut gelesen) |
+
+## Namensregel — wichtig
+
+VisiCut baut die Pfade unter `laserprofiles/` aus den **Namen** von Gerät, Material und Profil,
+nicht aus den Dateinamen. Umgewandelt wird mit `Helper.toPathName()`
+([Helper.java](https://github.com/t-oster/VisiCut/blob/master/src/main/java/de/thomas_oster/visicut/misc/Helper.java)):
+Alles außer `A–Z a–z 0–9 . -` wird durch `_<ASCII-Code>_` ersetzt.
+
+```
+Leerzeichen -> _32_     (   -> _40_     )   -> _41_     ü -> _252_
+```
+
+Also:
+
+```
+<name>Sperrholz Birke</name>   ->  materials/Sperrholz_32_Birke.xml
+                               ->  laserprofiles/Epilog_32_ZING/Sperrholz_32_Birke/3.0mm/cut.xml
+```
+
+`Sperrholz_Birke/` (ohne `_32_`) findet VisiCut **nicht** — die Einstellungen sind dann still weg,
+ohne Fehlermeldung. `materials/*.xml` benennt VisiCut beim Laden selbst um, die Ordner unter
+`laserprofiles/` **nicht**. Deshalb nach jeder Änderung von Hand:
+
+```sh
+python3 tools/validate.py .
+```
+
+Das Skript prüft Dateinamen, XML, Dicken, Property-Klassen, Wertebereiche und fehlende
+Einstellungen und gibt bei sauberem Stand `TOTAL: 0 problems` aus.
+
+Die Dicke im Ordnernamen ist `Float.toString()` + `mm`, also `3.0mm`, `0.55mm`, `6.5mm` —
+nicht `3mm`. Sie muss in `<materialThicknesses>` des Materials stehen, sonst wird sie
+im Auswahlfeld gar nicht angeboten.
+
+## Property-Klassen (Epilog Zing)
+
+| Profil | Typ | XML-Element | Felder |
+|---|---|---|---|
+| `cut`, `mark` | `vectorProfile` | `<PowerSpeedFocusFrequencyProperty>` | power, speed, focus, frequency |
+| `engrave` | `rasterProfile` | `<PowerSpeedFocusProperty>` | power, speed, focus |
+| `engrave 3d` | `raster3dProfile` | `<PowerSpeedFocusProperty>` | power, speed, focus |
+
+`LaserPropertyManager` registriert XStream-Aliase nur für `PowerSpeedFocusProperty`,
+`PowerSpeedFocusFrequencyProperty`, `FloatPowerSpeedFocusFrequencyProperty` und
+`LaosCutterProperty`. Andere Kurznamen (z. B. `EpilogEngraveProperty`) lassen sich **nicht**
+laden. Den `EpilogEngraveProperty`, den der Epilog-Treiber für Raster-Teile erwartet, baut
+VisiCut beim Laden selbst aus dem `PowerSpeedFocusProperty` — `frequency` gehört dort nicht
+hinein und geht sonst verloren.
+
+Mehrere Einträge in einer `<linked-list>` = mehrere Durchgänge.
+`frequency` wird von liblasercut auf 10–5000 Hz begrenzt, power/speed sind Prozent.
+
+`settings/settings.xml` hat `useThicknessAsFocusOffset=true`: VisiCut addiert die Materialdicke
+zum `focus`-Wert. `focus` in den Profilen ist also ein **Offset** in mm, kein Absolutwert.
+
+## Neues Material anlegen
+
+Am einfachsten in VisiCut selbst (Einstellungen → Material verwalten, dann Laserparameter
+im Hauptfenster speichern) — dann stimmen alle Pfade automatisch. Von Hand:
+
+```sh
+python3 - <<'EOF'
+name, thick = "Neues Material", ["3.0"]
+ALLOWED = set("abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-")
+print("".join(c if c in ALLOWED else "_%d_" % ord(c) for c in name))
+EOF
+```
+
+… und den ausgegebenen Namen für `materials/<x>.xml` und `laserprofiles/<Gerät>/<x>/` verwenden.
+Danach `tools/validate.py` laufen lassen.
+
+## Vorschaubilder
+
+`materials/<name>.png` wird von VisiCut automatisch gefunden. Herkunft und Lizenz je Bild:
+[`materials/CREDITS.md`](materials/CREDITS.md). Neu erzeugen: `python3 tools/make_thumbnails.py`
+(braucht `requests` und `Pillow`).
+
+## Herkunft der Parameter
+
+* [FabLab Rothenburg – Lasercutter](https://wiki.fablab-rothenburg.de/index.php/Lasercutter) —
+  die im Lab selbst getesteten Werte. Bei Abweichungen gilt das Wiki.
+* [FabLab Region Nürnberg – ZING 4030](https://wiki.fablab-nuernberg.de/w/ZING_4030) —
+  gleiche Maschinenklasse (Zing, 30 W); deckt sich u. a. bei Sperrholz Birke und Leder.
+
+Alle übrigen Werte sind **nicht** gegen eine dieser Quellen belegt. Vor dem ersten Job auf
+einem neuen Material: Testschnitt auf Verschnitt.
+
+## Nicht lasern
+
+PVC, Vinyl, ABS, Polycarbonat, HDPE, Polystyrol — siehe Hinweistext in
+`devices/Epilog_32_ZING_32__40_FabLab_32_Rothenburg_41_.xml`.

laserprofiles/Epilog_32_ZING/Acorn_32_Sperrholz/11.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>70</power>
+    <speed>80</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acorn_Sperrholz/11.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>70</power>
-    <speed>80</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/3.0mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>100</power>
-    <speed>30</speed>
-    <focus>0.0</focus>
-    <frequency>5000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/3.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>55</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/10.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/10.0mm/cut.xml

@@ -11,4 +11,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/2.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/2.5mm/cut.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/2.5mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/2.5mm/mark.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/2.5mm/mark.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/3.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>55</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/3.0mm/mark.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/3.0mm/mark.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylglas/4.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/4.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/5.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/5.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/6.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Acrylglas_32__40_PMMA_41_/6.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Acrylic/4.0mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>99</power>
-    <speed>39</speed>
-    <focus>0.0</focus>
-    <frequency>1000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Depron_Schaum/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Airplak_32_Kartonschaum/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Buettenpapier_300g/0.3mm/cut.xml → laserprofiles/Epilog_32_ZING/B_252_ttenpapier_32_300g/0.3mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Baumwollstoff/0.5mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Filz_Polyester/2.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Depron_32_Schaum_32__40_EPP_41_/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Depron_Schaum/6.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Depron_32_Schaum_32__40_EPP_41_/6.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Bastelpapier/0.1mm/cut.xml → laserprofiles/Epilog_32_ZING/Dickes_32_Bastelpapier/0.1mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Dickes_32_Bastelpapier/0.1mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>6</power>
+    <speed>100</speed>
+    <focus>-5.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Eloxiertes_32_Blech/1.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Eloxiertes_Blech/1.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>50</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>5000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Airplak_Kartonschaum/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Filz_32_Polyester/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/1.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/2.0mm/engrave.xml

@@ -1,8 +1,7 @@
 <linked-list>
-  <PowerSpeedFocusFrequencyProperty>
+  <PowerSpeedFocusProperty>
     <power>30</power>
     <speed>100</speed>
     <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Finnpappe/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Glas/3.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>50</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Glas_32__40_nur_32_Gravieren_41_/3.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Glas_32__40_nur_32_Gravieren_41_/5.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>50</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Graue_32_Pappe/0.55mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Graue_32_Pappe/0.55mm/engrave.xml

@@ -4,4 +4,4 @@
     <speed>100</speed>
     <focus>0.0</focus>
   </PowerSpeedFocusProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Graue_Pappe/0.55mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>20</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>1000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/HDF/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/HDF_32__40_Hochdichte_32_Faserplatte_41_/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>-1.5</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Hartfaserplatte/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Hartfaserplatte/5.0mm/cut.xml

@@ -11,4 +11,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Holz/4.0mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>100</power>
-    <speed>40</speed>
-    <focus>0.0</focus>
-    <frequency>1000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Judopokal_Platte/0.6mm/cut.xml → laserprofiles/Epilog_32_ZING/Judopokal-Platte/0.6mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Karton_160g/0.2mm/cut.xml → laserprofiles/Epilog_32_ZING/Karton_32_160g/0.2mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>400</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Karton_300g/0.3mm/cut.xml → laserprofiles/Epilog_32_ZING/Karton_32_200g/0.25mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>400</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Karton_200g/0.25mm/cut.xml → laserprofiles/Epilog_32_ZING/Karton_32_300g/0.3mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>400</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_3mm/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Kiefer_32_Massivholz/5.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/5.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Kiefer_32_Massivholz/8.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/0.8mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/1.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/1.5mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/1.5mm/engrave.xml

@@ -1,8 +1,7 @@
 <linked-list>
-  <PowerSpeedFocusFrequencyProperty>
+  <PowerSpeedFocusProperty>
     <power>80</power>
     <speed>100</speed>
     <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kraftplex/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Kromapappe/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Leder/2.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Leder_32__40_chromfrei_41_/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>2500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_2mm/2.0mm/cut.xml → laserprofiles/Epilog_32_ZING/MDF/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/2.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_4mm/4.0mm/mark.xml → laserprofiles/Epilog_32_ZING/MDF/2.0mm/mark.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Linde/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/MDF/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/3.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_2mm/2.0mm/mark.xml → laserprofiles/Epilog_32_ZING/MDF/3.0mm/mark.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_4mm/4.0mm/cut.xml → laserprofiles/Epilog_32_ZING/MDF/4.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/4.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_5mm/5.0mm/mark.xml → laserprofiles/Epilog_32_ZING/MDF/4.0mm/mark.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_5mm/5.0mm/cut.xml → laserprofiles/Epilog_32_ZING/MDF/5.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/5.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_3mm/3.0mm/mark.xml → laserprofiles/Epilog_32_ZING/MDF/5.0mm/mark.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_6mm/6.0mm/cut.xml → laserprofiles/Epilog_32_ZING/MDF/6.0mm/cut.xml

@@ -11,4 +11,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/6.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>70</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF/6.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/MDF_2mm/2.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>70</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/MDF_3mm/3.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>70</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/MDF_4mm/4.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>70</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/MDF_5mm/5.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>70</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/MDF_6mm/6.0mm/engrave.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>70</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>500</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/MDF_6mm/6.0mm/mark.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>15</power>
-    <speed>100</speed>
-    <focus>0.0</focus>
-    <frequency>5000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Moosgummi/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/PET_Folie/0.55mm/cut.xml → laserprofiles/Epilog_32_ZING/PET-Folie/0.55mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>200</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/PET_Folie_0.5mm/0.5mm/cut.xml → laserprofiles/Epilog_32_ZING/PET-Folie/0.5mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/POM_Delrin/4.0mm/cut.xml → laserprofiles/Epilog_32_ZING/POM_32_Delrin/4.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/POM_Delrin/6.0mm/cut.xml → laserprofiles/Epilog_32_ZING/POM_32_Delrin/6.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/PP_Folie/0.8mm/cut.xml → laserprofiles/Epilog_32_ZING/PP-Folie/0.8mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>50</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Papier/0.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Papier/0.0mm/engrave.xml

@@ -9,4 +9,4 @@
     <speed>100</speed>
     <focus>0.0</focus>
   </PowerSpeedFocusProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Papier/0.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>6</power>
+    <speed>100</speed>
+    <focus>-5.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Platane/5.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas/4.0mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>100</power>
-    <speed>25</speed>
-    <focus>0.0</focus>
-    <frequency>5000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/3.0mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>100</power>
-    <speed>30</speed>
-    <focus>0.0</focus>
-    <frequency>5000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Plexiglas_XT/4.0mm/cut.xml

@@ -1,8 +0,0 @@
-<linked-list>
-  <PowerSpeedFocusFrequencyProperty>
-    <power>100</power>
-    <speed>25</speed>
-    <focus>0.0</focus>
-    <frequency>5000</frequency>
-  </PowerSpeedFocusFrequencyProperty>
-</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/1.5mm/cut.xml → laserprofiles/Epilog_32_ZING/Sandwich_32_Karton_32__40_Graphicboard_41_/1.5mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/10.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Sandwich_32_Karton_32__40_Graphicboard_41_/10.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Sandwich_32_Karton_32__40_Graphicboard_41_/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sandwich_Karton/5.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Sandwich_32_Karton_32__40_Graphicboard_41_/5.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Schichtstoff_HPL/0.8mm/cut.xml → laserprofiles/Epilog_32_ZING/Schichtstoff_32__40_HPL_41_/0.8mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Siebdruckkarton/1.5mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>1000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Silikon_Gummimatte/1.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Silikon_32_Gummimatte/1.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>5000</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/SnapPap/1.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/2.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Sperrholz_32_Birke/2.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_Birke/3.0mm/cut.xml → laserprofiles/Epilog_32_ZING/Sperrholz_32_Birke/3.0mm/cut.xml

@@ -5,4 +5,4 @@
     <focus>0.0</focus>
     <frequency>500</frequency>
   </PowerSpeedFocusFrequencyProperty>
-</linked-list>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_32_Birke/3.0mm/engrave.xml

@@ -0,0 +1,7 @@
+<linked-list>
+  <PowerSpeedFocusProperty>
+    <power>60</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+  </PowerSpeedFocusProperty>
+</linked-list>

laserprofiles/Epilog_32_ZING/Sperrholz_32_Birke/3.0mm/mark.xml

@@ -0,0 +1,8 @@
+<linked-list>
+  <PowerSpeedFocusFrequencyProperty>
+    <power>15</power>
+    <speed>100</speed>
+    <focus>0.0</focus>
+    <frequency>5000</frequency>
+  </PowerSpeedFocusFrequencyProperty>
+</linked-list>